Battery Canister

Battery Canister

Battery & Canister I create the canisters for my diving lights from UV-resistant PVC pipe by making a plug for the base out of flat stock on the CNC.  I epoxy it in place and finish it on the lathe.  I then dye it using a solvent based dye then add hardware.  The...
Lightheads

Lightheads

Lightheads I design and make standardized lightheads for diving that house LEDs from 10w to 150w.   They are designed to dissipate heat away from the LEDs and drivers and also withstand depths of 300+ feet.  I machine the heads from 6061 Aluminum pipe and then anodize...
PVC Backplate

PVC Backplate

PVC Backplate I made this PVC Backplate as a low weight travel alternative to my stainless backplate.  The plate weights 1.5lbs as opposed to the steeel’s 6lbs.  I made the template, cut it out with the CNC and then made a jig/mold to bend it to the right shape...
Reel

Reel

400′ Reel Underwater reel for cave and wreck exploration.  I designed the parts in Adobe Illustrator, imported them into CamBam and then cut them out of flat stock made from 10″ round PVC.  PVC construction with a delrin...